Maximum Power Voltage (Vmp): 18V. Maximum Power Current (Imp): 4A. Output: USB DC 5V & DC 18V(Control Unit adjust the voltage to 14.4V output).Size: 7.25 inch width and 8.5 inch length. Please do not scratch the surface of the solar panel with a sharp object. When charging the charger with solar energy, please place the solar panel upwards in direct sunlight to ensure the charging effect. Please do not put the charger outdoors on rainy days to avoid short circuit.
The front of the solar panel is waterproof, but it is best not to enter the water at the USB and DC interfaces. 100% brand new and high quality.
Advanced maximum power point tracking technology, the efficiency is not less than 99.5%. High-quality components improve the system performance, and the maximum conversion efficiency is 98%. Super fast tracking speed and guarantee tracking efficiency. Large screen LCD display, charge and discharge current display, cumulative power generation and discharge power query, temperature display, light control + delay control; adjustable charge and discharge parameters, with power-off memory and other functions. Dual USB output, the maximum current is 2.5A.Equipped with all necessary protection devices, the control parameters of the system are adjustable, easy to set up and operate. Built-in overheating, overcurrent, short circuit, open circuit protection, fault elimination, controller automatic recovery. Two-way MOS tube anti-backflow circuit, high-power charging mode, ultra-low heat. Built-in short circuit protection, open circuit protection, reverse connection protection, overload protection.
Reverse current protection, low calorific value, with self-recovery function, will not damage the controller. Real-time display of temperature, charging current and discharge current. Current autofocus tracking charging, high charging efficiency, charging process does not stop detection, two-way focus tracking.
Name: LCD screen solar controller Voltage: DC 12V / 24V Display: LCD screen Self-consumption. 1X Solar Panels Battery Charge Controller 1X User Manual.
The charge regulator is only suitable for lead-acid batteries: OPEN, AGM, GEL, it is not suited for nickel hydride, lithium, Liions, or other batteries. This controller can only use photovoltaic panels as charging power. Do not use DC or other power as charging power.
The LCD display has an error of 0.2 V- 0.3 V, but this is normal. Old batteries may be degraded the capacity after hundereds of cycles, easily drop lower than 8V, which results in the controller will be shut off (LCD screen become totally "DEAD"). Indoor use only: the working temperature of this controller is -35°C to +60°C, during hot sunny days, the temperature outside might go up to 60-75°C. Please do keep the controller stay in cool and well-ventilated place to maintain good heat dissipation. This item is in the category "Home & Garden\Home Improvement\Electrical Supplies\Alternative Energy Supplies\Solar Power Supplies\Solar Panels & Kits".
The seller is "xkeasybuy22" and is located in this country: US. This item can be shipped to United States.