100W 200W 400W 1000W 500W Watt 12V Monocrystalline Solar Panel 12V PV Home RV

  

On the top side, we use anti-reflective, low-iron tempered glass with up to 95% transparency. It converts more solar rays directly into electricity than conventional solar panels. The solar modules use advanced encapsulation materials and multi-layer film lamination to protect the cells from physical damage or deformation, ensuring decades of solar module life. It effectively blocks water drops and water vapor from the outside. Even if it is immersed in water, the internal components will not be damaged in any way.

Don't worry about bad weather. Wiring method and precautions for solar system. The solar system connection is divided into parallel and series connection. The controller must connect the battery first and then the solar modules. When the solar modules are connected in series or parallel, pay attention to the highest PV input voltage of the controller.

The voltage supplied to the controller after the --series connection in parallel to the controller must not exceed the maximum input voltage of the controller. The total input power of the solar modules must not be greater than the rated power of the controller, otherwise there is a risk that the controller will burn out.

When the cable is connected to the individual components, the connection must be stable and must not come loose. The positive and negative terminals of the controller and the battery must be clearly checked. The positive and negative terminals must not be reversed. -If the power of one controller is not sufficient to supply all solar modules, several controllers can be connected to the battery at the same time. Solar Cell: Monocrystalline Grade A.

Open Circuit Voltage (Voc): 21.6V. Short Circuit Current (Isc): 6.12A. Maximum Current (Imax): 5.56A. Short Circuit Current (Isc): 12.2A. Maximum Current (Imax): 11.1A.

Maximum/Peak Voltage (Vma x): 18V. Short Circuit Current (Isc): 18.3A. Maximum Current (Imax): 16.67A.